Production and maintenance of metal signs

1. To avoid possible problems in the production of metal signs, we can choose passive protection and active protection, try to keep the objects that may cause damage to the metal signs away from the screen, and clean the screen as gently as possible to minimize the possibility of damage.

2. Cleaning

For the production of metal signs, the product itself is easy to be worn and scratched without special treatment or the addition of hardener. Therefore, for general dust treatment, you can wash it with a feather duster or clean water, and then wipe it with soft cloth. If the surface oil stain is disposed, add water with soft detergent and wipe it with soft cloth.

3. Metal signs shall be placed in a low dust environment as far as possible. A large amount of dust will affect the display effect, and too much dust will damage the circuit. In case of water inflow due to various reasons, please cut off the power immediately and contact the maintenance personnel until the display panel in the screen is dry.

4. The production of metal signs has the closest relationship with our users, so it is very necessary to do a good job in cleaning and maintenance. Exposed to the wind, sun, dust, etc. in the outdoor environment for a long time, the screen must be covered with dust after a period of time, which needs to be cleaned in time to prevent the dust from wrapping the surface for a long time and affecting the viewing effect.

The above is about the sharing of daily maintenance and repair of metal signs. The maintenance of metal signs must be regular work, and the service life will be directly affected by the maintenance work.